Home Company Profile
 
 
Grills & Registers Diffusers To Be Added Linear Bar Grilles Linear Slot Diffusers Jet Diffusers Fresh Air Louver Sand Trap Louver Disk Valves Volume Control Damper Fire Damper Gravity Shutter
 

 

 

 


Disk Valves.. 

 

Type:

  • Mina El Agaiby (Di.V.).

Characteristics:

  • For use as an air flow control damper in ventilating & air condition systems.
  • The damper blade consist of rolled aerofoil section and are of opposed blade configuration actuated by a single external drive arm.
  • Material: Frame & blades anodized aluminum profiles Bearings from a special plastic material (Pocan) temperature resistant up to 110 C.
  • Opposed blade action.
  • Blade position can be identified externally by the position of the slot in the external drive shaft.
  • Blades coupled inside damper frame by meshing aluminum cogs mounted at one end of each blade.
  • Blade pitch 100 mm. Case depth 120 mm.
  • Dimension (S) gives position of drive arm (see table of standard Sizes).
  • Drive arm can be locking at any angle with optional Hand Locking Quadrant (H.L.Q.).
  • When ordering specification of left or right - hand derive is not necessary.

Disk Valves Type Mina El Agaiby.S. (Di.v.)

Disk Valves Type Mina El Agaiby.R. (Di.v.)

 

    

Product Description:

Product Description:

  • Air Volume flow rate control by rotation of the central disc.
  • Having set the airway dimension (s) central disc fixed by the locking nut.
  • Simple valve installation by means of sub frame and clip fixing.
  • Parts list: Disc valve complete with installation sub frame.
  • Edge seal under valve outer ring.
  • Air volume flow rate control by rotation of the central disc.
  • Having set the airway dimension (S) central disc is fixed by the locking nut.
  • Simple valve installation by means of sub frame and clip fixing.
  • Parts list: Disc valve complete with installation sub frame.
  • Edge seal under valve outer ring.

 

 
  
   

Copyright 2001-2012.  All rights reserved.